ICB Orthotic Additions

ICB Extended Heel lifts are useful when a raise of more than 8mm is required.

ICB Extended Heel lifts are useful when a raise of more than 8mm is required. Finishing behind the metatarsal heads these lifts provide extended control & support, whilst not interfering with the patient’s ability to toe-off. One per pack.

Used as an aid in the treatment of a structural short leg. Always use a heel lift in conjunction with an orthotic. Available in: 4mm, 6mm, 8mm, small, medium, large. Available in packs of 2 or 10.

Rearfoot additions are applied when extra rearfoot control is needed (more than the 5° inversion built into ICB Orthotics). They can be used to reduce patient's pronating over the arch of the orthotic. Available in 2° and 4°, packs of 2 or 10.

Forefoot additions can be applied when extra forefoot support is needed. ICB Forefoot additions can be used for either Varus or Valgus deformity and are tapered to allow a smooth drop-off on the distal edge. Available in 4° and 6°, packs of 2 or 10.

Choose from Soft or Firm. Designed to lift the metatarsal arch and spread the metatarsals, helping to relieve the symptoms of metatarsalgia, pinched nerves and neuromas. Available in small or large, packs of 2 or 10.

COMPACT AND LIGHT WEIGHT FOR EASY HANDLING. The ICB Medical Heat Gun is an essential tool when prescribing and fitting ICB Orthotics. Its powerful 2-speed motor is designed to assist Practitioners in heating and customising ICB Orthotics to the contour of each patients' feet. The ICB Medical Heat Gun is lightweight and enables the fitting of ICB Orthotics to take place in only a matter of minutes.